Hayes Microcomputer Products DIVA T/A - Manual (Page 57)

DIVA T/A PC Card User’s Guide 57
Updating the DIVA T/A INF file (Windows
3.
x /Windows NT 3.51)
Note: This section only applies if you are using RAS.
Follow the steps below to update the DIVA T/A INF file:
1 Open any text editor.
2 Open the file MODEM.INF found in the Windows/System
directory.
3 Remove all sections relating to the DIVA T/A
4 Open the updated file WFWNTEIC.INF.
5 Copy the contents of WFWNTEIC.INF to the end of the
MODEM.INF file; save the appended MODEM.INF file, and
exit your text editor.
6 If you have RAS installed, start the RAS setup program.
7 From the RAS setup, remove the listed DIVA T/A and then re-
add it. Refer to the RAS online help for removing and adding
modems.