Hayes Microcomputer Products DIVA T/A - Manual (Page 38)

DIVA T/A PC Card User’s Guide 38
2 The Card Properties screen opens. Use the screen to:


Download updated firmware, or


Change your regional firmware
To download updated firmware, go to the section “Updating the
DIVA T/A Firmware” on page 53 of this guide.
To change your regional firmware, follow the steps below:
a) Select your geographic location from the ISDN Type field.
b) Confirm your firmware change by clicking OK in the
Configuration Tool prompt.
c) Configure the ISDN line to match your new location.
Configuring Profiles
The DIVA T/A configuration settings are organized into profiles and
saved in the card’s non-volatile memory. The DIVA T/A comes
equipped with a factory profile which requires only your ISDN
information to establish a factory Multilink PPP connection.
Profiles store unique configuration settings containing location-
specific information. You can define up to three different profiles.
Each profile can contain a Primary and an Alternate location. If the
DIVA T/A cannot connect using the Primary location parameters, it
automatically tries again using the Alternate location parameters.