Hayes Microcomputer Products DIVA T/A - Manual (Page 85)

DIVA T/A PC Card User’s Guide 85
5 Press Enter. Your system should respond with the prompt (>>).
If the prompt does not appear, exit your terminal emulation
program and restart from step 2.
Note: Do not type AT at the >> prompt.
6 At the prompt (>>), enter the following command:
$Dump <Enter>
Note This command is case-sensitive.
The system responds with the following display:
Please start XMODEM reception of dump file
7 Use the XMODEM transfer protocol built into your terminal
emulation program to receive the dump file. After the transfer is
completed, a message similar to the following is displayed:
Dump completed (239104 bytes sent)
If the transfer appears completed but no message is displayed,
press Enter to repeat the message.
8 To return to the prompt (>>), enter the following:
<Enter>
9 When the prompt (>>) is displayed, you can then enter AT
command mode with the following command to restart your
card:
AT <Enter>