Hayes Microcomputer Products DIVA T/A - Manual (Page 50)

DIVA T/A PC Card User’s Guide 50
Parameter Description
Non-Initializing Setting this parameter to Yes explicitly
disables SPID initialization and instructs
the DIVA T/A to start up in Non-
Initializing Terminal mode. For more
information on Non-Initializing Terminal
mode, refer to page 77.
7 After completing the ISDN parameters configuration, press
Escape to exit the ISDN Parameters menu.
8 From the Main menu, select Advanced and press Enter to open
the configuration screen.
*-----------------------------------------------------------------------------*
| DIVA T/A - North American Version 1.5.1 |
| Copyright (c) 1997 Eicon Technology Corporation |
+-------------------------------------------------------------+---------------+
|MENU: Advanced |Choice: |
| |Yes |
| Enable DOV: No |No |
| | |
| Enable BACP/BOD: Yes | |
| | |
| Initial Billing Interval: 60 | |
| Billing Interval: 60 | |
| | |
|AutoSPID Location Storage: Primary | |
| | |
| | |
| | |
|<ESC> Previous menu | |
+-----------------------------------HELP----------------------+---------------+
| ISDN Settings: |
| Specifies Data Over Voice as the default outgoing call type. |
| |
| |
*-----------------------------------------------------------------------------*
The following parameters can be configured:
Parameter Description
Data Over Voice Note: Available on North American models
only.
Specifies Data Over Voice Bearer
Capability as the outgoing call type.
If voice calls are less expensive than data
calls in your tariff area, you can select this
option. DOV calls are data calls made over
a BRI line using Voice Bearer Capability.
For DOV to work, the remote device to
which you are connecting must support
incoming DOV calls.