Hayes Microcomputer Products DIVA T/A - Manual (Page 48)

DIVA T/A PC Card User’s Guide 48
5 In the Protocols field of the Main Menu, specify the B-channel
protocol you want to use (note: the protocol must match the
protocol on the receiving system). For most connections, the
default Multilink PPP should be used. If the default is not
supported, PPP for single B-channel connections, V.120 and
V.110 can also be used. Both PPP and Multilink PPP require
that a PPP communications stack be installed on your computer.
Warning: When using Multilink PPP for incoming calls, only
SPAP or PAP authentication are supported.
6 Select Primary or Alternate ISDN Parameters and press Enter to
open the configuration screen.
*-----------------------------------------------------------------------------*
| DIVA T/A - North American Version 1.5.1 |
| Copyright (c) 1997 Eicon Technology Corporation |
+-------------------------------------------------------------+---------------+
|MENU: Primary ISDN Param. |Choice: |
| |National ISDN-1|
| Switch Type: Auto-Detect |AT&T 5ESS |
|FIRST NUMBER |Auto-Detect |
| SPID: | |
| Directory Number: | |
| Non-Initializing: No | |
| | |
|SECOND NUMBER | |
| SPID: | |
| Directory Number: | |
| Non-Initializing: No | |
| | |
|<ESC> Previous menu | |
+-----------------------------------HELP----------------------+---------------+
| Sets the appropriate primary switch type to use during card initialization. |
| Used with primary SPID and number.subaddress. |
| -Automatically selects National ISDN-1 or AT&T 5ESS. |
| |
*-----------------------------------------------------------------------------*