HP 220 - Manual (Page 105)

1 Ensure that the encoder stripis oriented
with the transparent area up, and with
three holes on the left side and one hole
on the right side.
2 Thread the stripthrough the apertures
in the cartridgeĆcarriage assembly.
3 With washer and nut, secure the encoder
stripto the service station.
4 Press the forward end of the encoder
springĆbracket slightly inward and place
the encoder stripbetween the tabs and
over the threaded post on the encoder
springĆbracket.
5.5 mm
Compress
Spring bracket
Threaded post
Tabs
6Ć41 Removal and Replacement C3187Ć90000
Reinstalling the Encoder Strip