HP 220 - Manual (Page 132)

7 Replace the indicated screw.
8 Replace the two indicated screws. (Long dogĆpoint screws.)
4
3
Torx-15
LEFTĆHAND SIDE
RIGHTĆHAND SIDE
5
Torx-20
9 Replace the screws on the bottom cover.
Torx-20
D/A1Ćsize plotters have four screws.
E/A0Ćsize plotters have five screws.
LEFTĆHAND SIDE
Before reĆinstalling the overdrive
enclosure, ensure that both flags on the
media sensor move freely when you pass
a sheet of media over them.
10 Turn the plotter to its correct position.
C2libr2tion: After having reassembled
the plotter, perform the mediaĆsensor
calibration.
6Ć68 Removal and Replacement C3187Ć90000