Henny Penny PFE-592 - Manual (Page 16)

Model 590/592
1-4. ERROR CODES (Continued)
CE Only - Along with the error codes from page 1-11, CE
units have the following self-diagnostic error codes:
DISPLAY CAUSE PANEL BOARD CORRECTION
“E10” High limit Reset the high limit by manually pushing up on the red
reset button; if the high limit does not reset, the high limit
must be replaced per the High Limt Temperature Control
Section
“E15” Drain Switch Close the drain, using the drain valve handle; if display
still shows “E-15”, check the drain microswitch per the
Drain Switch Section
1-12 1103