HP 220240 - Manual (Page 105)

4.5.2 LAYOUT Menu
The features of the LAYOUT menu shown in Table 4–9 allow you to make
adjustments to the print position (the distances from the edges of the paper
where printing begins) and to set the new line so that print wraps when it
reaches the right margin.
Table 4–9: LAYOUT Menu Features and Values
Feature Values Description
offsetX -10.0
.
.
.
+0.0 1
.
.
.
+10.0
Determines the offset distance from the right
and left sides of the page. An offset of 10.0 is
approximately 1.1 in.
offsetY -10.0
.
.
.
+0.0 1
.
.
.
+10.0
Determines the offset distance from the top
and bottom of the page. An offset of 10.0 is
approximately 1.1 in.
autoNL ON 1 When the print position reaches the right
margin, it wraps to the left margin of the next
line.
OFF When the print position reaches the right
margin, it does not move to the next line until the
printer receives a Carriage Return (CR) or Line
Feed (LF) command from the host computer.
Data beyond the right margin is lost until the
carriage return or line feed command is received.
1 Factory default setting.
4–20 Operator’s Guide