HP 220240 - Manual (Page 52)

9. Wait until PF FEED xxx is displayed and repeat step 8.
Continue feeding paper until the Data indicator light shuts off and
the display reads 00 READY.
If you want to continue feeding paper manually after the display
reads 00 READY, go to step 6. If you have finished feeding paper
manually, go to step 10.
10. Press
On Line
to place the printer off line.
— The On Line indicator shuts off.
11. Press
Feeder Select
until the paper feed mode you want to use is displayed.
FEEDER = Lower
FEEDER = Upper
FEEDER = Auto
FEEDER = Manual
FEEDER = Option
NOTE:
FEEDER = Option is displayed when the envelope feeder is
installed.
— After about 3 seconds the display will read 00 READY.
— The cassette feed mode selection is now stored in operating
memory.
12. Press
On Line
to place the printer back on line.
— The On Line indicator lights.
Operating Information 2–25