HP 220240 - Manual (Page 226)

DECSITF—Select Input Tray Failover
CSI Ps1 ; Ps2 ; . . . Psn SP w
Where:
Ps1 = 0 Disables all composite input trays.
Ps1 = 1 Defines composite tray 1.
Ps2–Psn = n Designates the tray as a member of the composite tray.
NOTE: Tray numbers are the same as in the DECASFC sequence.
DECSNC—Set Number of Copies
CSI Pn & q
Where:
Pn = 0 Is treated as one copy.
Pn = 1–99 Is the number of copies.
Pn > 99 Is treated as 99 copies.
DECSSS—Set Sheet Size
CSI Ps1 ; Ps2 ; Pn3 ; Pn4 SP {
Where:
Ps1 = 0 Is any slot.
Ps1 = 1 Is top tray.
Ps1 = 99 Is manual feed.
Ps2 = n Is key number (ignored).
Pn3 = n Is width (defined as leading edge).
Pn4 = n Is length.
DECSTR—Soft Terminal Reset
CSI ! p
Resets the printer to initial state values and returns to DEC PPL3 protocol.
DEClaser Printer Quick Reference Guide A–25