HP 220240 - Manual (Page 249)

host
The computer that provides services and enables startup and management
of the peripheral devices, such as printers.
image area
The printable portion of a page. Like most printers, the DEClaser 2200
does not allow printing to the physical edge of the page.
initialize
To set starting values such as counters, switches, or addresses, at the
beginning of, or at prescribed points in a computer routine.
interface
Connects two devices (through the interface cable) such as a computer
and printer, making it possible for them to communicate with each other.
The DEClaser 2200 printer supports a parallel (Centronics) and a serial
(RS232C) interface.
landscape printing
A method of printing characters parallel to the long edge of the paper.
Landscape printing is typically used for printing wide charts or tables.
LCD
Liquid crystal display. The printer messages appear on the LCD, which is
part of the control panel.
letter size
The North American paper size of 8 ½" x 11".
line weight
The thickness of a line. The thicker the line, the heavier the line weight.
menu
Menus contain the features and values to configure the printer. For
example, the LAYOUT menu contains features such as offsetX and offsetY,
which are used to configure margins on the page. There are six menus
for the DEClaser 2200 printer that in total constitute the current printer
settings.
moisture content
The ratio of water to the dry mass of paper. The moisture content can vary
depending on the type of paper and the amount of humidity it is exposed
to.
Glossary–4