Honeywell HRXD9 - Manual (Page 90)

Configuration
90
Figure 3-75 Health Check Screen
The DVR can be configured to run self-diagnostics and report the results.
2. Highlighting the box beside System and pressing allows you to select the
interval that you want the DVR to run self-diagnostics on the system. You can
select from 1 hr to 30 days, or Never.
3. Highlight the Setup... box beside Check Recording and press . The Check
Recording screen appears. Highlighting Schedule On and pressing toggles
the schedules On and Off. When set to On, you can select the day, time range and
interval that you want the DVR to run self-diagnostics on the recorder. The
Interval can be selectable from 1 min to 7 days, or Never. The
box allows you
to delete a check recording schedule.
Figure 3-76 Check Recording Screen
4. Highlighting the box under the Interval heading beside each alarm-in and
pressing
allows you to change the interval that you want the DVR to run
self-diagnostics on Alarm Inputs. You can select from 1 hr to 30 days or Never.
5. Highlight the Storage tab and the Storage screen ( Figure 3-77 ) displays.