J. removal and replacement of fan motors, K. door re-hinging and drawer conversion – Hoshizaki HUR40A(-D) User Manual

Page 55

Advertising
background image

55

J. Removal and Replacement of Fan Motors

1) Turn off the power supply, and unplug the unit.
2) Remove the front panel, then remove the wire guard located below the display panel.
3) Unhook the wiring connectors at the control box, then remove the two hex-head M6

attachment nuts and the M5 bolt.

4) Very carefully slide out the refrigeration system. Support the evaporator as it clears

the evaporator case. For the remainder of the procedure, see the appropriate section
below.

Condenser Fan Motor

5) Disconnect the lead wire to the condenser fan motor.
6) Remove the two 5×10 condenser fan motor bracket attachment bolts and remove the

condenser fan motor assembly.

7) Remove the fan motor from the attachment base and remove the fan blade from the fan

motor.

8) Install the new fan motor and return the refrigeration unit to its proper position in the

reverse order of the removal procedure.

9) Plug in the unit, and turn on the power supply.

Evaporator Fan Motor

5) Disconnect the lead wire to the evaporator fan motor.

CAUTION

Be careful when handling the evaporator shroud assembly. This assembly
includes a defrost heater sheathed in a glass tube. This sheathing can be
easily damaged and may also cause cuts if broken. Heater will also be hot after
a defrost. Use gloves when handling and avoid touching the glass directly. Also
prevent heaters from touching other parts.

6) Remove the eight 4×8 T2 screws attaching the shroud to the evaporator unit and

remove the shroud. Remove the defrost thermistor if necessary to remove the shroud.

7) Remove the four 4×12 T2 evaporator fan motor attachment screws and remove the

evaporator fan motor.

8) Install the new fan motor and return the refrigeration unit to its proper position in the

reverse order of the removal procedure.

9) Plug in the unit, and turn on the power supply.

K. Door Re-Hinging and Drawer Conversion

Contact your local Hoshizaki distributor or Hoshizaki Technical Support
(1-800-233-1940) if door reversing or drawer conversion is desired.

Advertising
This manual is related to the following products: