Hoshizaki KM-260BAH - Manual (Page 75)

70
22. SPRAY TUBE, WATER SUPPLY PIPE, SPRAY GUIDE
1) Unplug the icemaker or disconnect the power source.
2) Remove the top panel.
3) Remove the top cover.
4) Remove the silicone hose and spray tube. See Fig. 20.
5) Remove the water spray pipe and spray guide from the evaporator plate. See Fig.
20.
6) Refi t the removed parts in the reverse order of the removal procedure. Check for
water leaks.
IMPORTANT
Fit the spray guide securely and tightly on the evaporator fi n. Otherwise,
cloudy or irregular ice cubes or performance reduction may be caused.
7) Plug in the icemaker or connect the power source.
Fig. 20
Silicone Hose
Spray Tube
Spray Guide Water Spray Pipe