Frymaster BIH52 User Manual
Page 109
4-38
NOTE: In September 1999, significant changes were made to the design of the filter base
assemblies used in BIH52 fryers. The most visible change was the removal of the casters on all
assemblies except 806-8804 (which is used in units manufactured for sale primarily in Japan). The
motor cover was also redesigned and a lower plumbing shield was added. Additionally, the two-
piece motor support (P/Ns 900-7469 and 900-7470) was replaced with a single, stronger support.
In order to provide continued support for units built prior to August 1999, a new filter base assembly
with casters (P/N 106-0043SP) was created to replace the original 806-5895 filter base assembly,
which is no longer available.
Two additional modifications to the design of the base sides have been made since August 1999.
These include the replacement of the die-cast metal handles with handles formed into the sides, and
the replacement of the separate lock brackets with brackets that are also formed into the sides.
ITEM
PART #
COMPONENT
1
900-5477
Cover, Motor (September 1999 and later) (used with all three assemblies)
*
824-0558
Cover, Motor (Prior to September 1999)
2
900-1949
Standoff, Filter Wiring Box (used with all three assemblies)
3
900-7557
Cover, Suction Tube (used with all three assemblies)
4
900-9634
Shield, Filter Plumbing (used with all three assemblies)
5
810-0949
Caster, 2.5-inch Swivel (also used in original 806-5985 assembly)
6
806-9153
Side, Left Filter Base (used in 106-0043SP)
7
806-9150
Side, Right Filter Base (used in 106-0043SP)
8
823-2289
Support, Filter Pan (used in all three filter base assemblies)
9
900-5396
Support, Filter Motor (used in all three filter base assemblies)
10
826-1374
Screw, #10 x ½-inch Washer Hex Head (Pkg of 25)
11
810-0180
Handle, Plated Die-cast Metal
12
826-1360
Screw, 10-24 x 5/16-inch Round Slotted Head (Pkg of 25)
13
201-3770
Side, Left Filter Base (used in 806-8648SP)
14
202-3770
Side, Right Filter Base (used in 806-8648SP)
15
806-9154
Side, Left Filter Base (used in 806-8804SP)
16
806-9151
Side, Right Filter Base (used in 806-8804SP)
17
810-1211
Caster, BIH52 Rigid (used in 806-8804SP only)
18
900-1953
Bracket, Filter Lock (used on base assemblies prior to September 1999)
*
809-0440
Nut, 5/16-inch Keps Hex (used for securing casters to base assemblies)
*
826-1677
Pin Extension Kit
* Not illustrated.