FUJITSU CM71-00329-7E - Manual (Page 130)

120
CHAPTER2 Dependence Functions
2.3.4.7 External Trigger Break
This function aborts the program execution when an external signal is input from the
TRIG of the Emulator.
■ External Trigger Break
This function aborts the program execution when an external signal is input from the TRIG of the
Emulator.
When the external trigger break occurs, the following message appears at the status bar.
Break at address by external trigger break
■ How to set
Set the external trigger break as follows.
• Command
- SET TRIGGER
For details, refer to "3.35 SET TRIGGER" in "SOFTUNE Workbench Command Reference
Manual".
• Dialog
- "Emulation" tab in debug environment setting dialog
For details, refer to "4.7.2.3 Debug Environment" in "SOFTUNE Workbench Operation Manual".