FUJITSU CM71-00329-7E - Manual (Page 80)

70
CHAPTER2 Dependence Functions
2.2.1.4 Operating Frequency
This section explains the setting of operating frequencies.
■ Operating frequencies
Set the operating frequencies of the MCU. Enable only DSU3. DSU3 ranges from 1 to 200 MHz. This
setting provides the optimum communication speed between the MCU and emulator.
This function can be controlled by the [Frequency] tab in debug environment setting dialog.
Notes:
• This setting is used to set maximum operating frequencies. Actual operating frequencies will not
be changed.
• Actual operating frequencies exceeding these settings will cause improper communication with
the emulator.