FUJITSU CM71-00329-7E - Manual (Page 135)

125
CHAPTER2 Dependence Functions
The sequencer operates as shown below when it uses the real-time monitoring bus interface:
[Setup Example]
>SET SEQUENCE 1.3.2, r=4
Events 1, 3, and 2 are specified respectively for Levels 1, 2, and 3. Event 4 is specified as a restart
condition.
■ Setting Sequencer
The sequencer can be set by the dialog or the command.
●
Setting by dialog
Select [Debug] - [Sequence] menu.
For details, refer to "4.6.6 Sequence" in "SOFTUNE Workbench Operation Manual".
●
Setting by Command
1. The event is set according to the SET EVENT command.
2. The event set by the SET SEQUENCE command is set as a sequence.
For details, refer to "3.15 SET EVENT" or "3.31 SET SEQUENCE (type2)" in "SOFTUNE Workbench
Command Reference Manual".
Start
Event 1
NO
Level 1
YES
Event 3
NO
Level 2
YES
Event 2
NO
Level 3
YES
Event 4
YES
Event 4
YES
Break
NO
NO