FUJITSU CM71-00329-7E - Manual (Page 142)

132
CHAPTER2 Dependence Functions
2.3.7.1 Display Format of Trace Data
There are three formats for displaying trace buffer data.
■ Display Format of Trace Data
• Display Only Instruction Operation: Specify Instruction
• Display Bus Cycles: Specify RAW data
• Display by Unit of Source Lines: Specify Source
■ Display Only Instruction Operation
In this mode, the instruction operation is displayed in disassembly units.
■ Display Bus Cycles
In this mode, detailed information on all sampled instruction fetch cycles and data access cycles is
displayed.
■ Display by Unit of Source Lines
This mode only displays source lines.