Frymaster GC User Manual

Page 17

Advertising
background image

3-1

GAS COOKERS GSMS, GBC, AND GC

INSTALLATION AND OPERATION MANUAL

CHAPTER 3: OPERATING INSTRUCTIONS

1

6

5

4

3

2

10

7

8

9

1

Numeric Keypad

6

Skim Switch

2

Boil Mode Indicator

7

Timer Start Switch

3

Boil Mode Switch

8

Simmer Mode Switch

4

Power Switch

9

Simmer Mode Indicator

5

LED Display

10

Trouble Light

3.1

Introduction

The Spaghetti Magic Controller allows the operator to specify a cook time in minutes and seconds,
then initiate a cooking cycle. This controller is available in three configurations. The standard
configuration has both automatic filling (Autofill) and automatic skimming (Autoskim) features.
Options include Autofill only, or neither Autofill nor Autoskim.

When in the BOIL mode, the burners are lit at all times. It is used when actually cooking pasta.

The SIMMER mode feature maintains the water temperature just below boiling, which conserves
energy and water. This feature is designed for rethermalizing previously cooked packaged products
and for keeping the cooker in standby.

The AUTOSKIM and SKIM features are independent of each other. The AUTOSKIM feature, on
units so equipped, adds water for approximately 3 seconds once a minute. It cannot be turned off.
The SKIM feature, when activated by pressing the skim button on the controller, delivers a
continuous spray of water for approximately 2 minutes, then stops until the button is again pressed.
In both cases, the purpose is to cause the water in the cookpot to overflow into the drain, carrying
floating starch with it. (A buildup of starch reduces the efficiency of the cooker and can cause
erroneous temperature and water level sensing.)

Advertising