Frymaster GC - Manual (Page 32)

5-6
5.4 Replacing the Controller
1. Disconnect the cooker from the electrical supply.
2. Remove the two screws in the upper corners of the control panel and swing the panel open from
the top, allowing it to rest on its hinge tabs.
3. Disconnect the wiring harness from the back of the controller.
4. Disconnect the ground wire from the controller. Remove the control panel by lifting it from the
hinge slots in the frame.
5. Follow the instructions that came with the replacement controller to dismount the failed
controller from the control panel and install the new controller.
6. Reverse Steps 1 through 4 to complete the procedure.