FARGO electronic II - Manual (Page 36)

31
4.
Follow the on-screen instructions to complete
installation. When installed, the 32-Bit Print
Spooler will appear in the Programs group of the
Start menu.
NOTE
Before installing updated 32-Bit Print Spooler versions,
always uninstall the existing print spooler version from
your system. To do this, simply select 32-Bit Print
Spooler from the list of programs in the Add/Remove
Programs Properties window and click on the
Add/Remove
button.
To print with the 32-Bit Print Spooler, you must
select the Fast 32-bit Spooler option from within
the printer driver setup window as described in
section C. When this option is selected, the print
spooler will automatically open and close with the
start and finish of each print job.
NOTE
You can also manually open the 32-Bit Print Spooler
simply by selecting its icon from the Programs group of
the Start menu.
When the 32-Bit Print Spooler is running, its icon
will appear in the Windows 95 Task Bar. During a
print job, it is sometimes helpful to click on this
icon to bring the 32-Bit Print Spooler status
window to the foreground of your application.
This window provides a number of details about
the print jobs being sent to the Color ID Card
Printer.
The Current Job tab tells you the name and size of
the file printing, the progress of the overall print
job, as well as the total number of copies left to
print. It also provides buttons which allow you to
pause or cancel the print job at any time during the
printing process.
The Settings tab tells you the port and printer to
which you are printing and also allows you to
configure the timeout setting. In most instances,
the settings under this tab rarely need to be
changed.