Technical specifications – FARGO electronic II User Manual
Page 63
58
11
Technical
Specifications
Printing Method:
Dye-sublimation/resin thermal transfer
Printing Resolution:
300 dpi (11.8 dots/mm)
Colors:
Up to 16.7 million
Print Speed:
Approximately 8 seconds (K)
Approximately 15 seconds (KO)
Approximately 30 seconds (YMCKO)
Additional 45 seconds required if applying PolyGuard
overlaminate
Printing Area:
Standard CR-80 Card:
Card Size
2.13Ó (54mm) x 3.38Ó (86mm)
Print Area
1.93Ó (49mm) x 3.1Ó (80.5mm)
Oversize Card:
Card Size
2.36Ó (60mm) x 3.62Ó (92mm)
Print Area
2.24Ó (57mm) x 3.5Ó (88mm)
Accepted Card Width:
2.1Ó to 2.63Ó W (53mm to 67mmW)
Accepted Card Length:
3.25Ó to 3.88Ó L (82mm to 98mmL)
Accepted Card Thickness:
.01Ó to .04Ó (.254mm to 1.02mm);
Card Types:
PVC or Polyester cards with polished PVC finish;
monochrome resin ribbon required for straight polyester
cards
Card Capacity:
Accepts up to 100 standard CR-80 PVC Cards; auto or
manual feed
Software Driver:
Windows driver included for IBM-PCÕs and compatibles
Interface:
Standard 8-bit Centronics-type parallel (ECP compatible)
Operating Temperature:
65¼F to 80¼F (18¼C to 27¼C)
Humidity:
Non-condensing 20%Ð60%
Dimensions:
10.44Ó H x 24.79Ó W x 10.94Ó D
(265mmH x 630mmW x 278mmD)
Weight:
42 lbs. (19 kg)
Agency Listings:
Safety standards: UL 1950, CSA C2.2 and T†V-GS
(IEC-950); Emissions standards: FCC Class A,
CRC c1374, Class A and T†V-EMC (IEC-801 -2, -3, -4;
CISPR 22, Class B) CE
Supply Voltage:
110-120 or 220-240 VAC
Supply Frequency:
50 Hz/60 Hz
Options:
¥ Magnetic Stripe Encoding Module, High and low
coercivity, Tracks 1, 2, and 3
¥ CardMaker for Windows software