FARGO electronic II - Manual (Page 8)

2
Safety
Precautions
Before operating the
unit, please read the
following safety
precautions carefully.
3
Warnings
CAUTION!
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THE UNIT TO RAIN OR
MOISTURE. TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
FRONT, TOP OR BACK PANELS. NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
■ Operate the unit only on 110-120 VAC, 50/60 Hz.
For printers that have been shipped outside of
the United States and Canada, operate the unit
only on 220-240 VAC, 50/60 Hz. If you have any
doubt as to whether you have a unit with the
correct voltage rating for your countryÕs power
supply, DO NOT ATTEMPT TO USE THE
UNIT.
Contact your dealer or the factory.
■ Stop operation immediately if any liquid or solid
object should fall into the cabinet. Unplug the
unit and have it checked by qualified service
personnel.
■ Do not disassemble the cabinet. Refer servicing
only to qualified personnel.
■ Service personnel: parts of this device may be
damaged if exposed to static electrical discharges
generated by various means, such as walking on
a carpeted floor. To avoid potential damage,
always wear an appropriate personal grounding
device, such as a wrist strap (w/ integral resistor)
connected to an ESD ground. Or, at a minimum,
make positive contact with the bare metal chassis
of the printer with your hand prior to touching
any internal electrical components.