FARGO electronic II - Manual (Page 37)

32
The Job Queue tab appears only when a print job is
being sent to the printer. This tab tells you the
name and status of each job in the queue and shows
you the order in which the jobs will print if you
have sent multiple jobs to the printer. A control
button is also provided which allows you to delete
every job listed in the queue. To delete the job
currently being printed, simply select the Cancel
Print button under the Current Job tab.
C. Setting Up
the Windows
Printer Driver
Once the printer driver has been successfully
installed, you will need to set the driver up for the
particular card size and type of ribbon you have
installed in the printer. There are also several
additional options that can be selected. Use the
following steps to select the appropriate printer
driver settings:
1. If using Windows 3.1x, go back to the Control
Panel and the Printers group using steps 1 and 2 on
pages 27 and 28. If using Windows 95, Click the
Start
button, point to Settings, and select Printers.
Then, click on the Color ID Card II icon with the
right mouse button and select Properties. The
Properties window will appear.
2. In Windows 3.1x, select the Setup button. In
Windows 95, click on the Details tab of the
Properties window and select the Setup button.
NOTE
Some applications allow you to change these same
printer driver options from their “Print” and/or “Printer
Setup” screens. This means that you don’t have to go
back to the main printer setup window each time you
want to change a setting or option in the printer driver.
These applications will usually give you the same choices
and options, but in a slightly altered format.
3.
The Color ID Card II
Printer screen appears.
Change the options as
follows: