Furuno FS-1570 - Manual (Page 101)

5. CALLING, RECEIVING
5-39
4. Key in ID of coast station (nine digits) with the numeric keys and then push the [ENTER]
knob.
Note: If you have registered some coast IDs (Chapter 6) you can insert a desired
telephone number in your message as follows:
1. Press the [FILE/CURSOR] key after completing step 2.
2. Rotate the [ENTER] knob to choose file which contains the telephone number
you want to use and push [ENTER] knob to show the telephone number.
3. Push the [ENTER] knob again to insert the telephone number into your
message.
4. Go to step 7.
5. Push the [ENTER] knob to open the TEL NO. menu.
GO TO ALL VIEW
CALL TYPE:
COAST ID
DSC FREQ
PSTN CALL
: 001234567
:12M-INTL
----------------
TEL NO.
** Compose message **
6. Enter telephone no. (up to 16 digits) with the numeric keys and then push the [ENTER]
knob.
7. Push the [ENTER] knob to open the DSC FREQ menu.
GO TO ALL VIEW
CALL TYPE
COAST ID
: PSTN CALL
: 123456789
TEL NO. : 123456789012345
DSC FREQ :12M-INTL
6 MHz
8 MHz
$
12 MHz
4 MHz
2 MHz
16 MHz
18 MHz
22 MHz
25 MHz
#
OTHER
OTHER: Special, private channel
** Compose message **
Rotate [ENTER] knob
to scroll.
8. Rotate the [ENTER] knob to choose DSC band desired and then push the [ENTER]
knob. Rotate the [ENTER] knob to choose DSC frequency desired and then push the
[ENTER] knob. The display changes as below.
DSC FREQ : 2M-INTL
GO TO ALL VIEW
CALL TYPE : PSTN CALL
COAST ID : 001234567
TEL NO. : 1234567890123456
** Compose message **
9. Press the [CALL] key to send the PSTN call (transmission time: about 7 sec.). The
display shows the following message.