Furuno FS-1570 - Manual (Page 34)

2 SSB RADIOTELEPHONE
2-10
2.6 User Channels
The USER CH menu allows registration of user TX and RX channels, where permitted by
the Authorities.
NOTICE
FURUNO will assume no responsibility
for the disturbance caused by the
unlawful or improper setting of user
channels.
2.6.1 Registering user channels
“USER CH” in the System setup menu must be enabled in order to register user channels.
For further details, contact your dealer.
1. At the radiotelephone screen, press the [#/SETUP] key.
**** Setup menu ****
NB : OFF
SQ FREQ : 600 HZ
FAX RX ENABLE : OFF
USER CH
SYSTEM
2. Rotate the [ENTER] knob to choose USER CH and then push the [ENTER] knob.
3. ENTRY is selected; push the [ENTER] knob.
*** User ch entry **
!
MODE: SSB
# UP $ DOWN
0 0201. TX: 2111.5 RX: 2111.5
00202. TX: 2222.0 RX: 2222.0
00203. TX: 2333.5 RX: 2333.5
00204. TX: 2444.0 RX: 2444.0
00205. TX: 2555.5 RX: 2555.5
"
CH: 2-01
4. Push the [ENTER] knob to open the user channel options window.
*** User ch entry **
!
MODE: SSB
"
CH: 2-01
#
UP
$
DOWN
00201. TX: 2111.5 RX: 2111.5
00202. TX: 2222.0 RX: 2222.0
00203. TX: 2333.5 RX: 2333.5
00204. TX: 2444.0 RX: 2444.0
00205. TX: 2555.5 RX: 2555.5
MODE
CH
FREQ
5. Rotate the [ENTER] knob to choose MODE and then push the [ENTER] knob.