Furuno FS-1570 - Manual (Page 74)

5 CALLING, RECEIVING
5-12
5. If you want to send a proposal, rotate the [ENTER] knob to choose RE-SEND and then
push the [ENTER] knob.
COM. FREQ : 12341.5 KHZ
DSC FREQ : 12M-INTL
GO TO ALL VIEW
STATION ID : 001234567
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
CALL TYPE : INDIVIDUAL
** Compose message **
6. Prepare an individual call and press the [CALL] key to send. If the receiving station
accepts your proposal, you can begin communications.
Manually acknowledging individual call with “ABLE”
1. When an individual call is received and the equipment is set up with manual
acknowledge and comply type “ABLE,” the alarm sounds and the display looks like the
one below.
Individual request
call received.
FROM SHIP: 121234567
ROUTINE
TELEPHONE CH 12034
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as shown below.
MAR-23-2002-23:00:00 ECC: OK
INDIVIDUAL REQUEST
FROM COAST: 001234567
ROUTINE
TELEPHONE CH 12034
Received message
ANSWER
! "
ALL VIEW
To view contents, rotate [ENTER] knob
to choose ALL VIEW and then push
[ENTER] knob.
3. Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob. The
display shown below appears.
TO COAST : 001234567
COM. TYPE : TELEPHONE
COM. FREQ : NO INFO
CALL TYPE : ABLE
ACKNOWLEDGEMENT
DSC FREQ : 12M-INTL
GO TO ALL VIEW
ABLE
UNABLE
** Compose message **
4. Rotate the [ENTER] knob to choose ABLE and then push the [ENTER] knob. The
display changes as below. (Working frequency is automatically set as specified by other
party.)