Furuno FS-1570 - Manual (Page 87)

5. CALLING, RECEIVING
5-25
5.5.2 Receiving a neutral craft call
1. When a neutral craft call is received the alarm sounds and the display changes as
below.
Neutral craft
call received.
FROM SHIP: 123456789
SAFETY
TELEPHONE 2182.0 KHZ
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
* Received message *
MAR-23-2002-23:59 ECC: OK
NEUTRAL CRAFT
FROM SHIP: 123456789
SAFETY
TELEPHONE 2182.0 KHZ
GO TO ALL VIEW
3. Press the [CANCEL] key to go to the radiotelephone screen. Watch on the working
frequency specified by radiotelephone or NBDP.
In case of NBDP Terminal Unit
After receiving a neutral craft call, do the following to watch by NBDP Terminal Unit.
1. The display shows “OCCUPIED” and the TX and RX frequencies.
2. The message from the sending station appears on your NBDP Terminal Unit.