2 registering id codes – Furuno FS-1570 User Manual
Page 140
9 NBDP PREPARATIONS
9-2
3. For final verification of the data, the Caution shown in the illustration below appears. If
the code is correct, press the [Enter] key again.
Answerback Code
123456789 FURU X
Answerback Code Entry
O K
Cancel
Caution
Confirm the 'CODE' before pressing ENTER key.
You cannot change the CODE once it has been entered.
Message for confirmation of code entered
9.1.2 Registering ID codes
1. Press function key [F5] and then the [6], [7], [8] or [9] key to enter the Group ID Code (4
or 5 digits), Group ID Code (9 digits), Select ID Code (4/5 digits) or Select ID Code (9
digits), respectively.
Select ID Code (4/5)
Select ID Entry
ID code screen
2. Enter Group ID or Select ID as appropriate and then press the [Enter] key. A prompt
asks you to verify data. If the ID is correct, press the [Enter] key.
3. For final verification of the data, the Caution shown in the figure below appears. If the ID
is correct, press the [Enter] key again.
Select ID Code (4/5)
12345
Select ID Entry
O K
Cancel
Caution
Confirm the 'CODE' before pressing ENTER key.
You cannot change the CODE once it has been entered.
Message for confirmation of code entered