Furuno FS-1570 - Manual (Page 162)

11 TRANSMITTING, RECEIVING
11-8
11.7 Communication Example
This section shows how to register your station with a coast station (Singapore), in order to
connect with a land line and send messages to other stations.
Contact the coast station following the procedure in paragraph 11.2. Then, register your
station's name, call sign, answerback code, selcall number and AAIC (Accounting Authority
Identification Code) with the coast station.
You can call the Singapore coast station on ITU channels 809, 821 or 1201 (other channels
may also be used). Use communication mode ARQ. The Singapore coast station ID no. is
4620.
Registration procedure
1. Call Singapore coast station following the procedure in paragraph 11.2.
2. Singapore requests your AAIC.
3. Type your AAIC.
4. Singapore asks for your callsign. Send your station's name, callsign, answerback code
and selcall number.
5. Singapore sends time required to register your station.
6. Transmit end code.
9VG SERADIO RS
12345 FURUNO X
54321 ABCDE J
9VG SERADIO RS
MOM
F
UGOX DE 9VG RGR GA X X PSE SUPPLY YOUR AAIC HW
+ ?
OPR +
AAIC AA01 + ?
RGR PSE GIVE YOUR SHIP NAME CALLSGI CALLSIGN HW + ?
I INTRODUCE MY INFO LATER
PLS AGAIN
AAAAAA
CS- 1111
ANSWERBACK CODE- ccccc cccc c
AAIC- 9999
SELCALL- 56789
OK HW
+ ?
PSE BE SURE W ICH AAIC CFM PSE HW + ?
bb01 SO + + ?
RGR PSE OFF TX X HERE EEE CALL BACK 2MINS TIME X HERE WILL
INPUT YOUR DATA
CU BI HW
+ ?
OK TKS BI BI
Exchange answerback codes
Singapore requests your AAIC.
Singapore requests your station's name and callsign.
Enter your stations name, callsign, answerback,
code and selcall number.
Time required to reigister your station
Call operator.
Communications example