Furuno FS-1570 - Manual (Page 109)

6-1
6 PREPARING TX CALLS
In Chapter 5 you learned how to prepare and send various types of DSC calls. In this
chapter you will learn how to prepare and store individual, PSTN, group, area and test
calls for future transmission. 150 calls can be stored.
.
6.1 Preparing Individual Calls
1. At the DSC standby screen, press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose MESSAGE and then push the [ENTER] knob.
3. Push the [ENTER] knob to open the CALL TYPE menu.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN CALL
GROUP CALL
AREA CALL
TEST CALL
4. Rotate the [ENTER] knob to choose INDIVIDUAL and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the STATION ID entry window.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
0 0 0 0 0 0 0 0 0
6. Key in ID of coast station or ship station with the numeric keys and then push the
[ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE window.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: 001234567
: TELEPHONE
: NO INFO
: 2M-INTL
: GROUP CALL
: 012345678
: Routine
NBDP-ARQ
NBDP-FEC
TELEPHONE
8. Rotate the [ENTER] knob to choose communication type desired and then push the
[ENTER] knob.