Furuno FS-1570 User Manual
Page 75
5. CALLING, RECEIVING
5-13
DSC FREQ:
12577.5 KHZ
TO COAST:
121234567
COM. TYPE:
TELEPHONE
COM. FREQ: CH12034
CALL TYPE:
ABLE
ACKNOWLEDGEMENT
**
Compose message
**
GO TO ALL VIEW
5.
Press the [CALL] key to send the call. The display changes as below.
Able acknowledge
call in progress!
TIME TO GO:
7S
DSC FREQ :
12577.5
KHZ
TO COAST
:
121234567
ROUTINE
TELEPHONE
CH 12034
6.
After the call is completely sent (transmission time: 7 sec.), you can begin voice
communications by radiotelephone.
Communicating by NBDP Terminal Unit
After acknowledging an individual call, do the following to communicate by NBDP Terminal
Unit.
1. After the able acknowledge call is transmitted, the display shows “OCCUPIED” and the
TX and RX frequencies.
2. The message from the other party appears on your NBDP Terminal Unit.
3. After receiving the message from the other party, type your message and transmit it.
4. Press the function key [F10] (BREAK) to disconnect the line.