Furuno FS-1570 - Manual (Page 176)

12 MAINTENANCE & TROUBLESHOOTING
12-10
12.8.4 Diagnostics
General diagnostics
1. Press the function key [F6] to display the System menu.
System
Setup
Slave Delay
BK Timing PreTone
PostTone
Mute Timing PreBK
PostBK
Modem Output Level
MIF Tune
Freeze
AGC
Emission
TX/RX MSG Save
Edit Before sending
Time System
Time & Date
Display Mode
Self Test
Lock Change Default
5 msec (0- 50 msec)
10 msec (0-100 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 msec (0- 20 msec)
0 dBm (-30 - +10 dBm)
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF O N
OFF UTC SMT JST
2002/1/1/12:34:56
Normal Reverse
System menu
2. Choose Change from Setup.
3. Choose Self Test (at the bottom of the screen).
4. Press the [Enter] key. The results of the self test are displayed a short time later.
Self Test
Terminal Unit Test : ver. 1.20 :OK
Main Unit Test : ver. 1.17 :OK
Modem Unit Test : ver. 1.18 :OK
Radio Unit Test : ID xxxx*1 :OK
DSC Unit Test : ID xxxx*1 :OK
Printer Unit Test*2: Printer not Ready :NG
*1: Actual ID numbers appears.
*2: OK replaces NG when printer is turned on and normal.
Self test results
If NG appears for any unit checked, try the self test again. If it appears again, call for
service.