8 7.8.2 routine frequencies – Furuno FS-1570 User Manual
Page 126
7 DSC/WATCH RECEIVER SETUP
7-8
7.8.2 Routine frequencies
1. Press the [#/SETUP] key, choose SCAN FREQ and then push the [ENTER] knob to
display the Scan freq menu.
DISTRESS
2M :
FIXED
4M :
ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
**
Scan freq setup
*
ROUTINE
F1 :
2M-INTL
F2 : 4M-INTL
F3 : 6M-INTL
F4 : 8M-INTL
F5 : 12M-INTL
F6 : 16M-INTL
2. Choose the frequency to process and then push the [ENTER] knob. For example,
choose F1: 2 M-INTL.
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
**
Scan freq setup
*
OFF
2 MHZ
4 MHZ
6 MHZ
8 MHZ
$
#
12 MHZ
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
3. Push the [ENTER] knob, and the display looks something like the one below.
ROUTINE
F1 : 2M-INTL
F2 : 2M-USR3
F3 : 4M-INTL
F4 : 8M-INTL
F5 : 16M-LCL1
F6 : 25M-LCL2
DISTRESS
2M :
FIXED
4M : ON
6M : ON
8M :
FIXED
12M : ON
16M : OFF
**
Scan freq setup
*
INTL
:
T12577.5/R12657.0
LOCAL1 :
T12578.0/R12657.5
LOCAL2 :
T12578.5/R12658.0
$
4. Choose frequency desired and then push the [ENTER] knob. INTL are international
channels and LOCAL1/LOCAL2 are local channels. Rotating the [ENTER] knob selects
USER CH, for entry of user channels (where permitted).
5. Press the [CANCEL] key twice to return to the DSC standby screen.
Note:
Distress frequencies can be stored on the routine frequency memory. This is
convenient for backing up the watch keeping receiver.