Furuno FS-1570 - Manual (Page 84)

5 CALLING, RECEIVING
5-22
5.4.2 Receiving a geographical area call
1. The alarm sounds and the display shows "Geographical area call received" when a
geographical area call is received.
Geographical area
call received.
FROM SHIP: 123456789
ROUTINE
TELEPHONE 12264.0 KHZ
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
* Received message *
MAR-23-2002-23:59 ECC: OK
GEOGRAPHICAL AREA
FROM SHIP : 123456789
ROUTINE
TELEPHONE 12264.0 KHZ
GO TO ALL VIEW
3. Press the [CANCEL] key to go to the radiotelephone screen. Watch on the working
frequency specified in the geographic area call.
Sending reply by NBDP Terminal Unit
After receiving a geographic call, do the following to watch by NBDP Terminal Unit as
follows:
1. After the able acknowledge call is transmitted, the display shows “OCCUPIED” and the
TX and RX frequencies.
2. The message from the sending station appears on your NBDP Terminal Unit.