First Virtual Communications Voyager 3000 - Manual (Page 34)

Voyager 3000 User Guide
2-14
PSU Insertion and Removal
The VOYAGER 3000’s power supply is designed for hot pluggable operation. To achieve this
temperature sensitive current limiting is used. As the temperature to the devices increase the
current limiting function decreases. This will prevent undesirable surges. If removing and
replacing the same PSU please ensure that at least one minute has elapsed between removal
and re-insertion which will allow components to cool to ambient temperature.
Controller Insertion and Removal
To insert the controller push the device firmly into the device bay slot. Do not attempt to slam
it into position. To remove refer to the paragraph heading marked
Controller on page 2-10.