Viewing disks assigned to a logical drive – First Virtual Communications Voyager 3000 User Manual
Page 66
Voyager 3000 User Guide
5-2
2
Press t or s to select View and Edit Logical Drives.
and press ENT.
View and Edit
Logical Drives..
3
Press t or s to select logical drive and press ENT for
two seconds.
LG=0
Not defined ?
4
Press t or s to select the RAID level and press ENT
for two seconds.
TDRV=4 Create
LG Level=RAID5 ?
5
The LCD will display the first available SCSI drive.
C=1 I=0 1002MB
NEW DRV MICROP
Press t or s to select the drive then press ENT for
select drive.
6
Repeat step 5 for all the drives to be included in the
current logical drive.
7
Press ENT for 2 seconds to start initialization.
LG=0 4008MB 10%
Init Please Wait
The LCD will display the logical drive information
after completing initialization.
Example showing:
LG=0
Logical drive 0
RAID5
RAID 5 operation
DRV=5
5 physical drives
FL=0
No failed drives
SB=0
No spare drive
Note if NRAID or RAID 0 is selected, then initialization will be finished
almost immediately.
8
Press t or s to select the host channel / LUN to
which you want to map the logical
LG=0 Map to
CHL=0 LUN=0 ?
drive and press ENT.
9 Repeat step 1 to 8 for all the logical drives to be
created.
Viewing Disks Assigned to a Logical Drive
1 Press ENT for two seconds for the Main Menu.
2
Press t or s to select View and Edit Logical Drives
and press ENT.
View and Edit
Logical Drives..