FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 106)

4 Configuration
Figure 15: BX600: Network - Overview
Port 0/11 for an IBP 10/6 or port 0/31 for an IBP 30/12 must be connected to
the central management station.
4.1.4.2 Notes and recommendations
We recommend that you do not use the first uplink port in the network def-
initions. If you cannot avoid doing so, then you must note the following:
l
The speed definition used must remain set to auto negotiate.
l
The network that uses this uplink port must not be deleted.
106 ServerView Virtual-IO Manager