FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 207)

The number and type of LAN ports under Onboard IO channels are
adjusted automatically according to the server model you select. The
number of LAN ports and mezzanine/PCI cards cannot exceed the max-
imum possible value for the selected server model.
Comment
Comments on a more detailed description of the profile (optional)
5.4.4.2 Configure Cards step (Edit Server Profile wizard)
Configure Cards is the next step in the Edit Server Profile wizard.
In this step, you specify the number and type of mezzanine cards as well as
the number of I/O channels for each card and for onboard.
Figure 51: Configure Card step
In the Onboard box you can specify the type and number of onboard ports to
be supported with this server profile. If you selected a server blade model
under Preset values to use for server type in the Name step, the number
and type of ports is initialized according to the model. You can adjust the
number for the server profile. However, you cannot exceed the maximum pos-
sible value for the selected server model.
ServerView Virtual-IO Manager 207
5.4 Wizards