FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 195)

Boot Parameters for an iSCSI boot (LAN ports or iSCSI function on
CNA mezzanine card)
Figure 45: Boot Parameter step (iSCSI boot)
Initiator Parameters
Address Origin
DHCP
The system tries (in the case of an iSCSI boot) to obtain the client
IP address, subnet mask, and gateway IP address from a DHCP
server. Only the initiator name and (optional) the VLAN ID must be
specified here.
static
A static client IP address, subnet mask, and gateway IP address
must be specified.
Initiator Name
Name of the iSCSI initiator to be used (in the case of an iSCSI boot) for
the connection to the iSCSI target.
ServerView Virtual-IO Manager 195
5.4 Wizards