FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 187)

Service VLAN
Select the checkbox in the corresponding row under Service VLAN in
the table to define a network as a service VLAN.
Isolate mode
Select the checkbox in the corresponding row under Isolate mode to set
the isolate mode for this network. With isolate mode activated, servers
in the same chassis that use the same network cannot communicate
with each other, but only with an external device though the uplinks.
The column Isolate mode is not shown if the connection blade does not
support isolate mode.
Delete button
Deletes a selected VLAN networks from the list.
5.4.3 Create Server Profile wizard
You use this wizard to define a new server profile.
The Create Server Profile wizard comprises several dialog boxes to guide
you through the individual steps. All required steps are displayed in the tree
structure on the left.
You define a server profile in the Server Profile view in the area on the right
of the ServerView Virtual-IO Manager window. To open the Create Server
Profile wizard, click the New button in the area on the right or select New
Profile from the Profiles group context menu.
Another way to define server profiles is to switch to the view of the servers
managed by VIOM in the area on the left using the Server List button. Then
switch to the Server Configuration tab on the right and select Create Pro-
file from the context menu of a table entry.
5.4.3.1 Name step (Create Server Profile wizard)
Name is the first step in the Create Server Profile wizard. In the first step,
you specify the name of the server profile, its intended target, and optionally
a comment.
ServerView Virtual-IO Manager 187
5.4 Wizards