FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 175)

VLAN-Id
The unique VLAN number of the network specified above. The VLAN ID
must be assigned uniquely within a shared uplink set.
Native VLAN
Defines a network as native VLAN. All packages that do not contain a
VLAN ID will be allowed through this connection.
Service VLAN
Defines a network as service VLAN.
Isolate mode
You activate the isolate mode via Isolate mode. With isolate mode acti-
vated, server blades in the same chassis that use the same network can-
not communicate with each other, but only with an external device
though the uplinks.
This checkbox is not shown if the connection blade does not support iso-
late mode.
Add button
Adds the virtual LAN network to the table below.
Table
You can also define a network as a native VLAN or service VLAN and set the
isolate mode in the table retrospectively:
Native VLAN
Select the checkbox in the corresponding row under Native VLAN in the
table to define a network as a native VLAN.
Service VLAN
Select the checkbox in the corresponding row under Service VLAN in
the table to define a network as a service VLAN.
Isolate mode
Select the checkbox in the corresponding row under Isolate mode to set
the isolate mode for this network. With isolate mode activated, servers
ServerView Virtual-IO Manager 175
5.4 Wizards