FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 308)

11 Saving and restoring
11.3 Deleting backup files on the management station
The starting point for deleting backup files on the management station is the
Virtual-IO Manager tab.
1. Launch the relevant wizard using the Configuration Backup / Restore
button.
2. Select Delete Configuration to delete backup files you no longer need
on the central management station. The second step Select File in the
Delete Backup Files wizards opens.
3. Select the files you want to delete on the management station. To do
this, select the corresponding files in the list. Using the Select All and
Clear Selection buttons, you can select or deselect all the files.
4. Click Next to review the files to be deleted, and delete them by clicking
the Finish button.
11.4 Restoring VIOM-specific configurations
11.4.1 Restoring an IBP module configuration
If an error occurs during the configuration of an IBP module, then the con-
figuration of the IBP module no longer matches the one saved internally in the
database in the Virtual-IO Manager.
This incorrect status is displayed on the Setup tab for the respective chassis
with a corresponding status icon on the graphical display of the IBP module
on the rear side of the chassis.
In this situation, you can only continue configuring the respective IBP module
once you have restored the configuration. You do this as follows:
1. Click the respective IBP module in the graphical display on the rear of
the chassis.
2. Then click the Restore IBP button.
308 ServerView Virtual-IO Manager