FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 236)

5 Virtual-IO Manager user interface
Use default port
Uses the default port. The default port is dependent on the protocol and
the relevant module.
For a PRIMERGY rack server: Port 623
The Port input field is inactive if this option is checked.
For a standard configuration, these values should not be
changed.
5.5.3 Authentication dialog box (PRIMERGY rack server and
blade server)
The Authentication dialog box is displayed when you click the Manage or
Authentication button on the Setup tab. This dialog box varies depending on
what you have selected in the table on the Setup tab.
If you select several servers with at least one blade server in this table, you
only specify one user name and password. These will be used for all MMBs
and IBPs of all selected blade servers and for all selected PRIMERGY rack
servers. For protocol, port, and trap destination, the default values are used.
If this situation is not suitable for you, please select fewer servers in the table
before you click the Manage or Authentication button.
Figure 67: VIOM Manager authentication (PRIMERGY rack server and blade
server)
236 ServerView Virtual-IO Manager