FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 328)

12 Importing and exporting server profiles
The first or only FCTarget configures the boot device while the second
FCTarget configures the backup boot device. It contains the following
elements:
TargetWWPN
The WWPN (worldwide port name) of the port for the boot device.
TargetLUN
The LUN (logical unit number) address of the boot device.
FCLinkSpeed
Specifies the transmission speed used by this port. You can specify the
following values:
0
auto negotiate
The transmission speed is negotiated with the external switch.
1
1 Gbit/s full-duplex
2
2 Gbit/s full-duplex
4
4 Gbit/s full-duplex
8
8 Gbit/s full-duplex
FCTopology
Specifies the type of port connection with the external SAN network.
You can specify the following values:
0
auto (loop first)
328 ServerView Virtual-IO Manager