Handles (option) – Furuno FR1500 Mk3 User Manual
Page 16
1-6
bulkhead mounting
1. Remove the fixing plate, mounting base, bottom plate and cover.
2. Fasten the mounting base and bottom plate at the top of the display unit.
3. Fasten the cover at the bottom of the display unit.
4. Fasten the fixing plate to the bulkhead with M10 bolts, nuts and washers (local
supply).
5. Fix the display unit to the fixing plate with two hex bolts M8 x 40.
Bolt (M10)
(Local supply)
Hex bolt
(6 pcs.)
Screw
M3X6 (4 pcs.)
Hex bolt (M8X40)
(2 pcs.)
Binding screw
M4X8 (8 pcs.)
Bottom plate
BULKHEAD
Fixing plate
Mounting base
Figure 1-7 Bulkhead mounting of display unit
Handles (option)
1. Remove cosmetic caps at front of display unit.
2. Fasten the handles with rosette washers, spring washers and panhead screws.
Handle
(Type OP03-70, Code No. 008-423-420
Figure 1-8 Attachment of handles