Furuno FR1500 Mk3 - Manual (Page 43)

4-11
4.3 Automatic Tracking Aid ARP-10
Necessary parts
Table 4-3 Contents of ARP-10 installation kit ARP-10-A (Code No.: 000-086-996)
Name Type Qty Code No.
ARP-10 Board 18P9007 1 008-478-300
Cable Assy. 80-0633 1
Spacer SQ-10 4 000-801-678
Toroidal Core TFC-25-25-12 1 000-129-693
Cable Tie CV-150 1 000-570-325
Panhead Screw M3X8 4 000-881-404
1. Unfasten eight screws to remove the cover.
2. Fasten four spacers to the locations shown in Figure 4-11.
3. Fasten the ARP-10 Board to the spacers with four panhead screws.
4. Attach the cable assy. between J1 on the ARP-10 Board and J1107 on the
SPU Board. Attach toroidal core to cable assy. and fasten cable assy. with
cable tie.
5. Fasten the cover.
Figure 4-11 Display unit, right side view