Furuno FR1500 Mk3 - Manual (Page 33)

4-1
INSTALLATION OF OPTIONAL EQUIPMENT
4.1 Gyro Converter GC-8A
The GYRO CONVERTER GC-8A mainly consists of the GYRO CONVERTER
Board, which is installed at the rear of the radar display unit.
Necessary parts
Table 4-1 Contents of GC-8A installation kit
Name Type Code No. Qty
GYRO CONVERTER Board 64P1106 004-412-200 1
Spacer SQ-10 000-801-678 4
Washerhead Screw M3 x 8 008-456-404 4
PH-XH Connector 03-1761(14P-6P) 008-456-130 1
NH-XH Connector 03-1762(5P-5P) 008-456-140 1
Label 64-014-2021-1 100-132-701 1
VH Connector Assy. 03-1763(5P) 008-456-150 1
VH Connector Assy. 03-1764(3P) 008-456-160 1
Fuse FGMB 2A 250V 000-122-000 4
Note: Other parts may be contained in the installation kit; use only the parts
listed in the table above. Unrelated parts may be discarded.